G&J Hall Tools Inc.

Market leading provider of specialist tools for the industrial engineer and fabricator.

Leading with innovative solutions and manufacturing products of the highest quality, backed by a proven and responsive service.

Click for dedicated site

PB50 Low Profile

The new Powerbor PB50 Low Profile is our latest machine, with the potential to transform how you work on site.

Small in height, with powerful motor and 50mm cutting capacity, perfect for confined spaces and everyday drilling requirements, so you don’t have to compromise.

Designed for the engineer, for demanding environments
High quality castings and powerful motors
Motor overload protection

Largest capacity low profile magdrill on the market

Cutting diameter and depth of cut to 50mm
1200W motor with variable, 6 speed setting
Countersink to 30mm*

12 months comprehensive warranty as standard
See User Manual for complete specification
SAFETY GUARD; machines shown without Safety Guard for clarity

*requires an extension arbor – RD32059

Part numbers –
PB50 LOW PROFILE 1A
PB50 LOW PROFILE 3

Contact us for more information

Maximum hole cutting capacity in .2/.3C steel = 2" dia. x 2" deep

Arbor bore = 3/4" dia.

Motor Unit
Voltages	120V 50-60Hz	230V 50-60Hz
Normal full load	10A	6A
Electro Magnet	0.53 A	0.28 A
Size	7-9/16" long 3-1/8" wide
Holding Force at 20°C with 25mm minimum plate thickness The use on any material less than 25mm thick will progressively reduce the magnetic performance. If possible, substitute material should be positioned under the magnet and work piece to equate to a suitable material thickness. If this is not possible, an alternative secure method of restraining the machine MUST be used.	2250 lbs
Overall Dimensions
Height - minimum	7 - 1/16"
Width (including Capstan fitting)	3 - 15/16"
Length Overall (including Guard)	13 - 1/8"
Nett Weight	24 lbs
	PB50 LOW PROFILE 1	PB50 LOW PROFILE 3
Vibration total values (triax vector sum) in accordance with EN62841-1:	Vibration emission value	Vibration Emission Value
Level of sound pressure in accordance with EN62841-1:

Ear and eye defenders must be worn when operating this machine. Wear gloves to protect hands when operating the machine.

These tools are UK designed and manufactured with globally sourced components and conform to the requirements of EEC Document HD.400.1 and BS.2769/84

Suitable only for a single phase 50-60Hz A.C. power supply

DO NOT USE ON D.C. SUPPLY

Do not use your magnetic drill on the same structure when arc welding is in progress.
D.C. current will earth back through the magnet and cause irreparable damage.

WARNING: THIS APPLIANCE MUST BE EARTHED!

NB: ANY MODIFICATIONS TO THIS MACHINE WILL INVALIDATE THE GUARANTEE

Dual carrying handles for enhanced operating manoeuvrability
Reversible handles for use in restrictive conditions
Improved high density magnet for maximum adhesion
Corrosive resistant, tangle-free cable from stand to drill unit
Isolating power relay for improved handling safety
Control panel situated conveniently on the same side as the traverse handles
Free protective carrying case complete with safety strap, cutting fluid, safety guard and folding hex key set

Please click the button below to download the user's manual.